Reference page for get_defaultMaterials
Contents
get_defaultMaterials Returns the BH curve for old built-in materials
BH = get_defaultMaterials(matNumber)
returns the BH curve of the built-in material matnumber, in the format BH = [B H];
get_defaultMaterials(-1)
returns the number of available materials
[BH, coeffs] = also return loss coefficients c_hyst, c_eddy, c_ex, each representing the loss density (W/k) at 1 T and 50 Hz.
Materials:
- 0 = air
- 1 = Construction steel (Ovako 520 L)
- 2 = Steel sheet for rotor pole shoes
- 3 = Steel sheet for stator laminations
- 4 = Electrical steel sheet – Bochum STABOLEC 260-50 A
- 5 = Electrical steel sheet – Bochum STABOLEC 200-50 A
- 6 = Electrical steel sheet – Bochum STABOLEC 170-50 A
- 7 = Electrical steel sheet – Bochum STABOLEC 100-35 A
- 8 = Höganäs Somaloy 550
- 9 = Magnetic slot wedge material
- 10 = linear iron
- 11 = High-frequency steel sheet – Bochum V 270-35 A
- 12 = High-frequency steel sheet – Bochum HF 20
- 13 = High-frequency steel sheet – Magnesil-N (0.007")
- 14, 21 = linear PM material (mur = 1.05)
- 15 = Vacodur 50
- 16 = NO20
- 17 = NO12
- 18 = Copper, linear air
- 19 = M330-35A
- 20 = carbon fiber
- 22 = Inconel, linear air
- 23 = Aluminum, linear air
- 24 = Ti6Al4V (Grade 5)
- 25 = Stainless steel, linear
(c) 2017 Antti Lehikoinen / Aalto University
(c) 2019 Antti Lehikoinen / Smeklab